It Keeps Improving!

The 2 Trees TS2 is presently the flagship do it yourself laser engraver design from the TS series, sporting a really intriguing design for the stepper motors, making sure much better stability, in spite of the size of the working area and there are likewise some intriguing functions that you do not typically see on a gadget in this rate variety.

Undoubtedly, the 2 Trees TS2 does have a big emergency situation stop button, there is a delicate flame discovering sensing unit and I was shocked to see drag chains for the cable television management. Something that might be missing out on would be a touch-sensitive screen to enable regional control of the gadget, however you do get the alternative to either straight hook the 2 Trees TS2 to your computer system (by means of USB cable televisions) or perhaps utilize WiFi.

And there’s likewise an app! I have pointed out that you do get a bigger inscription location, so does that mean that this is a gadget prepared for massive production? The do it yourself element is a type of a give-away. The maker does guarantee that the 2 Trees TS2 is effective and fast sufficient to exceed the enthusiast level of usage, however you do need to put whatever together yourself. However, the other design from the series, the TS3 has an enclosure and comes pre-assembled, however the workspace is a bit smaller sized.

That being stated, let’s put the 2 Trees TS2 to the test and see both the method and the enhancements that the maker has actually gone through to this relatively specific niche kind of gadget, which is absolutely growing in appeal.

The Assembly

The 2 Trees TS2 laser engraver shows up in 3 different boxes and, while there isn’t a clear delimitation about which is the appropriate order, it’s finest to very first secure all the frames. The front and back frames must remain in different plans (the one with the handbook on top and the other with some wood samples), while the axis frames must all remain in the exact same box. In package with the user handbook, you’ll likewise discover the little bags with screws– it’s good that each remains in a different bag, identified appropriately.

two-trees-ts2-assembly
Connect the frames to the 2 Y-axis bars.

On the primary step, the handbook states to set up the frames, however it’s not actually dummy-proof, so I took the front and back frame (the rectangle-shaped frames) and I recognized the Y-axis frame– it’s the one that has a circular cut-out within the metal part with 4 wheels. The front and the back frames must have the motor and the control box dealing with outwards and the Y-Axis frames requires to be effectively lined up with the frames in order to place the 2 M5x25 screws on one side and one on the other side.

However prior to connecting the frames to the axis ensure to put the belt over the simultaneous wheel on the rear-facing frame. At this moment, the idler sheave must sit firmly on the other end of the Y-Axis. Usage 2 M4x16 screws to effectively connect it to the frame.

two-trees-ts2-laser-engraver-attachment
Change the belt regarding not be too tight.

The Y-Axis belt will more than likely be too tight– move the sheave to examine if it’s too tight or too loose. And to repair it, take a Hex secret from the plan (there are several) and determine the little screw at the bottom of the sheave. Change the screw so that the belt can move easily, however it’s not too loose regarding have an influence on the engraver efficiency (you must feel simply a bit of resistance).

Then, the maker states to do practically the exact same with the other Y-Axis– place the 3 screws into location after ensuring that the belt is over the simultaneous wheel. I did so, however I rapidly experienced an issue. That’s because on the next action, I needed to set up the X-Axis bar which is not actually challenging considering that I needed to ensure that the measurements point upwards and towards the front side (with the red glass).

two-trees-ts2-laser-engraver-x-axis
Line up the Y-Axis wheels and set up the X-Axis.

Then, I utilized 2 M5x20 screws to install the bar onto the area with the circular cut-out and another set of screws (M4x16 and M5x20) on the other side. Clearly, the concept is to have the 2 wheels completely lined up and they weren’t. The directions point out definitely nothing on how to accomplish ideal positioning, so I needed to try out my own. After loosing up the screws on the red circular pieces (the belt reviews them), I had the ability to move the X-Axis into the appropriate position.

Now it’s time to set up the laser module and to do so, you require to take 4 M3x6 screws and connect the module to the X-Axis. The directions state to place the 4 screws into the holes and I handled to do so quickly with 3 screws (I needed to run the red valve to change the height of the module), however one screw was obstructed by a part of the laser module. Sure, I handled to place it ultimately, however many individuals might quit and leave it with 3 screws. Later on, the directions state to set up the protective cover therefore I did utilizing the offered screws.

two-trees-ts2-kaser-module
Set up the laser module and the protective cover.

At this moment, I was enthusiastic that I was near the goal. Kid was I incorrect since I needed to set up the X-Axis drag chain and believe me, I was simply as baffled as you are when I inspected the handbook. After widening my swearing vocabulary, I lastly figured it out where whatever requires to get linked, in addition to to and from which side the chain requires to be moved regarding not enter front of the laser. I have actually connected a couple of more photos regarding assist you in case you get stuck as I did.

two-trees-ts2-laser-engraver-chain
Setting up the drag chain.

Later On, it was time to include the Y-Axis chain holder X1! You’ll discover it in a different bag and you require to utilize 2 screws to connect it to the left Y-Axis. The manual discusses another chain holder which obviously is currently connected to the chain which requires to be set up near the controller box, as seen in the pictures.

Last But Not Least, I needed to taker out the stepper motor from the plan and connect it on one side of the X-Axis bar, near the location where I set up the chain. You will discover a plastic valve on the other side which you can run to relax the belt– put the belt over the stepper motor and after that tighten up the valve once again.

two-trees-ts2-laser-engraver-wiring
Link all the wires.

Now we have actually lastly reached the circuitry. And the user handbook is really great in this regard (for a modification). Connect the cable television beside the stepper motor, the cable television that sits loose beside the Y-Axis stepper motor and I understand that the middle of the X-Axis is frightening, however it’s really rather simple. The maker has actually identified all the little cable televisions, so all you need to do is to match these labels.

The Style and the Developed Quality

As I pointed out in the introduction, the 2 Trees TS2 is a big laser engraver and I believed that the Longer LK5 had a huge workspace. However no, at 28.9 x 28.4 x 6.8 inches (73.3 x 72.1 x 17.2 cm) and an inscribing location of 17.8 x 17.8 inches (45.0 x 45.0 cm), my desk was hardly large sufficient to manage this laser engraver.

What was intriguing is that in spite of the length of the bars and the frames, they’re still strong– I am really lured to believe that the product is steel and not the commonly utilized aluminum. The design of the stepper motors is really intriguing since while there’s a stepper motor on the X-Axis which moves the belt, it is effectively counter-balanced and 2 Trees has actually placed the Y-Axis motor in the middle of the bar.

two-trees-ts2-laser-engraver-design
A closer take a look at the 2 Trees TS2.

This must make sure that the weight is really well balanced throughout the laser engraver which there must be no stability concerns. And it holds true, as long as you effectively change the belts stress, the motion must be smooth and there must be no vibrations, which is outstanding. In regards to visual worth, the 2 Trees TS2 looks actually good, in spite of the bare-bones-like style, which is regular for these do it yourself laser engravers. There are some red accents, the control box is slim and fits perfectly within the frame and the protective red screen is likewise an invited addition.

However, among the most essential elements is the absence of cable televisions pointing all over which’s thanks to the drag chains that are a discomfort to set up, however look excellent later on, particularly due to that bike-chain-like motion. There are a couple of fans set up to keep an appropriate temperature level when the 2 Trees TS2 is working, the very first being inside the control box. And it’s a 24mm basic fan that you can change and really must if you mind the loud sound it produces. Yes, it’s not peaceful at all.

Then, there’s the laser fan which keeps a great temperature level for the laser to run. You might have seen that inside package, there was a little accessory for the air tubes. If you didn’t comprehend why there was an empty tube that was merely there, relatively without a function.

two-trees-ts2-fan
The fan inside the control box.

Well, its function is to help with the air flow of the laser, so you can utilize the accessory to set up television beside the laser head and the other end of television requires to be connected to a compressor. Considering that television is not that large, it’s not a bad concept to utilize a relatively capable air compressor, so that it can make an appropriate distinction when utilizing the laser. In this manner, you must likewise see less alarms from the sensing unit which can be a bit too delicate inside.

What’s inside the control box?

The procedure of eliminating the control box is not really challenging considering that there are a number of screws on the side and more smaller sized screws on the rear side that you require to get rid of more thoroughly. You will not have the ability to completely take it out considering that there are great deals of cable televisions connected to package, however you require to a little move it regarding see the 2 other screws on the rear side that you likewise require to get rid of.

After that, the rear panel of the control box will separate by itself and you will have the ability to see the 3 stepper motor chips that rest on the 32-bit motherboard and I was likewise able to determine a couple of other elements. There the ESPRESSIF ESP32-WR00M-32U WiFi + Bluetooth + Bluetooth LE MCU module, the Nexperia 74HC595D 8-bit shift register, the Mouser MP1584EN MPS, the Winsok Semicon WSF40N10 MOSFET and the CH34OC (Arduino clone).

two-trees-ts2-laser-engraver-circuits
2 Trees TS2 Teardown.

The PC Software Application

In a comparable way to the Longer LK5 Pro, the 2 Trees TS2 can be utilized with LaserGRBL if you choose open source and complimentary or it will likewise work excellent with LightBurn which is a bit more user-friendly and simple to utilize, however it’s likewise not complimentary. I chose to offer LaserGRBL a shot considering that I utilized LightBurn prior to and, to link the PC to the 2 Trees TS2 laser engraver, I needed to choose the port number and the baud rate.

These require to match the ones from your PC and you can discover the worths by opening the Gadget Supervisor on a Windows OS maker and determine the Ports area. Then, go lower till you see the USB-SERIAL CH340– I needed to customize the baud rate to 115200 to match the one from the engraver and after that from the LaserGRBL software application, I clicked Link. You must see some details below the gcode area– to examine if whatever is undoubtedly working, click the arrows.

two-trees-ts2-lasergrbl
LaserGRBL user interface.

The laser module must move appropriately if it’s linked to the software application. If you click the File > > Open File and choose a BMP image, you’ll discover a couple of criteria on the left side. Among the most essential is the Conversion Tool where you can select Line to Line Tracing or 1Bit BW Dithering for inscribing the design (the latter is much better for grayscale charts). If you wish to cut into the surface area, then it’s much better to select in between Vectorize and the Centerline. The other essential area is the Quality which, by default is set to 30.000 lines per mm.

You will require to change this regularly than you believe with some products considering that paper or perhaps some wood can set off the flame sensing unit regularly. Finally, at the bottom, there’s the Instructions Change area, where you can Invert the colors, turn the image, crop it and more. Click Beside get a brand-new window with alternatives where you can choose the Inscription Speed (2 Trees recommends 1000mm/min), then there’s the Laser Mode which can be Continuous or Dynamic Power.

Pages: 1 2

2 Trees TS2

Two Trees TS2

Pros

  • Big workspace and enhanced stability
  • There’s an app – WiFi connection
  • It’s quick and can inscribe actually well
  • Drag chains for cable television management
  • Emergency situation button + flame sensing unit

Cons

  • The laser itself is quiet, the motors more efficiently, however the fan is really loud
  • It’s not that simple to put together the gadget
  • It’s a bit challenging to establish the WiFi, although fulfilling at the end.
logo

Mark is a graduate in Computer technology, having actually collected important experience throughout the years operating in IT as a developer. Mark is likewise the primary tech author for MBReviews.com, covering not just his enthusiasm, the networking gadgets, however likewise other cool electronic devices that you might discover beneficial for your every day life.

This short article was very first released in www.mbreviews.com.

Share:

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan.